Paragon Funded Trader · Education

Drawdown Rules Engine

A practical guide to understanding your drawdown floor, tracking remaining loss allowance, and checking proposed trade risk before you enter the market.

The key principle: your account balance is not necessarily the amount you can afford to lose. Your usable risk budget is determined by the distance between your applicable account value and your drawdown floor.

Run your numbers

Enter your figures to see your floor, buffers, the largest risk that fits, and what happens if your stop is hit. Tap a field for tips. Pre-filled with the guide’s example. Nothing is sent unless you join the email list.

Account setup
For your reference. It does not change the math.
$
$
$
$
Use the peak your firm recognizes. Leave blank to use the current value.
Maximum trailing drawdown
%
Percent of starting account size.
$
Your own cushion, not a firm rule.
Daily drawdown
%
Use the limit that applies to your account.
$
$
Only losses not already reflected in your current value.
Planned trade and position size
$
Dollar loss at your stop, including fees and slippage where practical.
$
Total dollars still at risk on open positions if their stops are hit. Leave blank if flat.
ELIGIBLE FOR REVIEW
Drawdown floor—
Value used—
Gross buffer—
Usable buffer—
Daily allowance—
Daily loss consumed—
Daily remaining—
Total risk (open + new)—
Largest risk that fits both limits—

If your stop is hit
Account value after—
Usable buffer after—
Daily allowance after—
A second trade of the same risk—
Losses this size the limits can absorb—
Position size
For your proposed risk—
Largest size that fits both limits—

Share your result

Make a branded image for a story, post or your Discord.

This is a simplified educational check. Your official account dashboard and firm rules always take precedence.

ELIGIBLE FOR REVIEW

1. Understand the interface

Account setup

Choose the firm profile and account stage. Enter starting balance, current closed balance, live equity, and the highest qualifying account value.

Maximum trailing drawdown

Set the maximum drawdown percentage, measurement basis, floor behavior, and safety reserve.

Daily drawdown

Enter the daily loss limit, session starting balance, additional loss adjustment, and proposed trade risk.

Trade eligibility check

Review the status and its explanation to see whether the entered risk fits both configured limits.

2. Enter your account information

FieldWhat to enter
Firm profileChoose Paragon Funded Trader (PFT) or Other firm.
Account stageSelect Evaluation or Funded.
Starting accountThe original balance used to establish the drawdown rules.
Current closed balanceBalance after realized trading profits and losses.
Current live equityCurrent account value, including unrealized profit and loss where applicable.
Highest qualifying balance/equityThe highest value recognized by your firm's trailing drawdown method.

Example account

Starting balance
$100,000
Closed balance
$103,000
Live equity
$102,500

Here, the closed balance is $3,000 above the starting balance, while live equity is $2,500 above it. That difference can matter when unrealized losses are included in a firm's real-time drawdown calculation.

Important: use the peak value that your firm actually recognizes. Do not use an intraday equity peak if the firm's rules track only closed balance, or vice versa. The engine uses the higher of the entered peak and the selected current balance/equity as its reference.

3. Configure maximum trailing drawdown

Step 3.1 — Enter the drawdown percentage

Enter the maximum permitted loss as a percentage of starting account size. For a $100,000 account with a 6% allowance:

$100,000 × 6% = $6,000 drawdown allowance

This is the dollar distance used by the configured floor calculation. It does not mean that you receive a fresh $6,000 loss allowance after every winning trade.

Step 3.2 — Choose the measurement basis

For example, if your closed balance is $103,000 but live equity falls to $101,500 during an open trade, the live-equity method uses $101,500. The closed-balance method continues to use $103,000.

Step 3.3 — Select floor behavior

1. Lock at starting account value PFT preset

The floor trails upward as the account grows but cannot move above the starting balance. For a $100,000 account with a $6,000 allowance, the initial floor is $94,000. It can rise to $100,000 and then remains there.

2. Trail continuously

The floor follows the highest qualifying value minus the drawdown allowance. A $110,000 peak with a $6,000 allowance produces a $104,000 floor.

3. Lock at profit threshold

The floor trails until the configured profit threshold is reached, then locks at threshold balance minus the drawdown allowance. With a $100,000 start, $6,000 allowance, and $6,000 threshold, the floor locks at $100,000 when the peak reaches $106,000.

4. Fixed starting-balance floor

The floor stays at starting balance minus the drawdown allowance regardless of account growth. A $100,000 account with a $6,000 allowance keeps a $94,000 floor.

PFT preset: selecting PFT sets the floor behavior to “Lock at starting account value.” Selecting Other firm enables the alternative modes. Confirm that the selected mode matches the official rules for your particular account.

Step 3.4 — Set a safety reserve

The safety reserve is a personal cushion you choose to leave unused. It is not an additional firm-imposed drawdown rule.

Current value $103,000 − floor $98,000 = $5,000 gross buffer
Gross buffer $5,000 − reserve $500 = $4,500 usable buffer

A reserve can help account for slippage, commissions, execution uncertainty, or simply preserve a margin of safety.

4. Interpret maximum drawdown outputs

Drawdown floor

The account value at which the configured maximum drawdown is exhausted. Reaching or crossing it may breach the account, depending on the firm's rules.

Remaining usable buffer

The distance between the selected current value and the floor, less your safety reserve. It is a cushion, not a recommended amount to risk on a single trade.

Worked example

Assume a $100,000 starting account, $103,000 current closed balance, 6% drawdown, $104,000 qualifying peak, “Lock at starting account value” floor behavior, closed-balance measurement, and a $500 safety reserve.

OutputCalculationResult
Drawdown floor$104,000 − $6,000$98,000
Gross remaining buffer$103,000 − $98,000$5,000
Safety reserveEntered manually$500
Usable buffer$5,000 − $500$4,500

There is $5,000 between the current closed balance and the modeled floor, but only $4,500 after preserving the reserve. Switching to live equity can change the current value used by the calculation.

5. Configure daily drawdown

Step 5.1 — Set the daily limit

Enter your permitted daily loss percentage. For example, a $100,000 session starting balance and a 2% daily limit produce a $2,000 allowance.

$100,000 × 2% = $2,000 daily loss allowance

This is an illustrative value, not a universal PFT rule. Use the daily limit that applies to your account.

Step 5.2 — Choose the daily measurement method

If your firm's daily breach rule is equity-based, a position may breach the floor while it remains open, even if it has not been closed.

Step 5.3 — Enter the session starting balance

Use the reference balance for the beginning of the firm's relevant trading session. Do not assume the firm's reset time is local midnight; check the official session reset time.

Step 5.4 — Enter additional daily loss

This field is an adjustment to loss already calculated from the session starting balance and current account value. Avoid counting the same loss twice. If the current balance/equity already reflects today's loss, leave this adjustment at zero unless a separate adjustment is required.

Step 5.5 — Enter proposed trade risk

Enter the planned dollar loss at the stop-loss level, accounting for contract quantity and, where practical, commissions, fees, and slippage. For a trade with $300 of planned risk, enter 300.

6. Interpret daily drawdown outputs

Daily loss allowance

The configured daily loss percentage multiplied by the session starting balance.

Daily allowance remaining

The amount left after the engine's calculated daily loss consumption and additional loss adjustment.

Worked daily example

Daily measureAmount
Session starting balance$100,000
Daily loss percentage2%
Daily loss allowance$2,000
Daily loss consumed$1,200
Daily allowance remaining$800
Proposed trade risk$300

The proposed $300 risk fits within the $800 remaining daily allowance. It must also fit within the maximum drawdown buffer.

7. Understand the Trade Eligibility Check

ELIGIBLE FOR REVIEW

The proposed risk fits both configured limits and the inputs pass basic checks. This is not a guarantee that the trade is safe or that the account complies with every firm rule.

NO TRADE

One or more checks have failed. Read the accompanying message for issues such as an exhausted allowance, insufficient buffer, invalid inputs, or excessive proposed risk.

Example: why the final check matters

Suppose the maximum drawdown usable buffer is $450, the daily allowance remaining is $800, and proposed trade risk is $500. The daily check passes, but the proposed risk exceeds the maximum drawdown buffer by $50. The engine should return NO TRADE.

Reducing the proposed risk to $300 fits both numerical limits, assuming all other inputs are valid. That means it passes the engine's basic checks—not that $300 is necessarily the best risk for the trade.

8. Use the engine before every trading session

  1. Verify your account rules. Confirm account stage, maximum drawdown percentage, trailing behavior, daily loss limit, and session reset time.
  2. Update your account figures. Enter the latest closed balance, live equity, and qualifying peak.
  3. Check the maximum drawdown buffer. Set a safety reserve and identify the remaining usable buffer.
  4. Update the daily loss calculation. Enter the session starting balance and avoid double-counting losses.
  5. Check planned trade risk. Enter stop-loss risk and review the status before entering.
  6. Recalculate after material changes. Recheck after closing trades, realizing significant profits or losses, or changing open exposure.
  7. Stop before reaching the firm's limit. Use a reserve and personal daily stop rule. Do not treat the breach floor as a target.

9. Common mistakes to avoid

MistakeWhy it matters
Confusing balance with equityFloating losses can consume buffer before a trade closes.
Using the wrong peak valueThe floor may be inaccurate if the firm tracks end-of-day balance rather than intraday equity.
Choosing the wrong floor behaviorStatic, continuously trailing, and locked floors can produce very different risk limits.
Double-counting daily lossesThe displayed remaining allowance can become artificially low.
Treating usable buffer as trade riskThe entire buffer is not a sensible risk allocation for one position.
Ignoring execution costsSlippage and fees can make actual losses exceed planned stop risk.
Assuming the reset timeThe firm's daily calculation may reset at a different time from your local calendar day.

10. Important limitations

Always verify: the official account dashboard and applicable firm rules take precedence if they disagree with this guide or the calculator.

11. Pre-trade checklist

Tick each item as you verify it. Your progress is shown below.

0 of 10 complete

Quick recap

Before risking capital, answer three questions:

  1. Where is my applicable drawdown floor?
  2. How much buffer remains after my safety reserve?
  3. Does my proposed trade risk fit within both maximum and daily loss limits?

If you can answer these consistently before every trade, the engine can support a repeatable account-preservation process.